Product Code: WBI PDS 0019
The Flow Release GS Pulling Tool provides a reliable method of running and retrieving tools with an internal 'GS' style fishing neck. The tool does not require the use of shear pins or drop balls to activate and requires only hydraulic pressure.
The tool can be engaged into a fishing neck by simply setting down minimal weight to overcome the spring force on the grapple. To release the tool from the fish simply set down weight on the BHA while circulating at a pre-determined flow rate through the tool. Flow through the tools adjustable orifice creates the back pressure required to move the latch grapple into the release position. The internal spring returns the grapple to the engaged position when flow through the tool is stopped. The tool can be functioned as many times as required.
The tool's adjustable orifice is easily changed to adjust the activation flow rate and pressure to suit each application. Flow through the tool can also be used to wash debris from above and inside the fish neck prior to latching.
Features:
- Hydraulic operation, no shear screws required.
- Flow through capability.
- Can be functioned multiple times.
- High tensile strength for jarring operations.
- Proven, reliable design.
- Standard service or H2S resistant tools available.
| Tool OD (in) | 1.69" | 2.13" | 2.88" | 3.63" |
|---|---|---|---|---|
| Connection | 1" AMMT | 1½" AMMT | 2.3/8" PAC DSI | 2.3/8" Reg |
| Nominal Fishneck Size | 2 GS | 2½ GS | 3 GS | 4 GS |
| Tensile Strength (lbs) | 58,000 | 88,000 | 150,000 | 165,000 |
| Overall Length (ft) | 1.19' | 1.52' | 1.59' | |
The information provided above is for typical common tool sizes only, additional tool sizes and variations are available. High pressure & high temperatures tools are available.
Note: The equipment specifications provided are for information purposes only and may be subject to change without notice.
