Sleeved Stabiliser (Centraliser)
Product Code: WBI PDS 0013
The sleeved stabiliser is designed to be part of the Bottom Hole Assembly to provide BHA stability or to allow easier location of tools during fishing operations. The sleeved stabiliser is normally run below the disconnect assembly or directly above the workover motor in milling operations.
Design Benefits:
- The body can accommodate a range of stabiliser sleeve diameters.
- Easily field redressed to accommodate different completion IDs.
- Simple robust design.
- Full through bore for drop ball passage.
| Tool OD | Ø 2.130" | Ø 2.880" |
|---|---|---|
| Connections | 1 1/2" AMMT Box x Pin | 2 3/8" Pac Dsi Box x Pin |
| Torsional Yield | 1.250 ft/lbs | 4,800 ft/lbs |
| Tensile Yield | 105,000 lbs | 201,000 lbs |
| Temperature Rating | 190° C | |
| ID | 0.62" | 1.00" |
| Length | 20.28" | 23.40" |
Note: The equipment specifications provided are for information purposes only and may be subject to change without notice.
