Junk Mill
Product Code: WBI PDS 0010
The Wellbore Intervention Junk Mill is designed for milling several types of obstructions and any loose debris contained in the wellbore. The tools sturdy construction and aggressive cutting inserts ensure high material removal rates therefore minimising milling times. The design allows for a small contact area which results in low torque consumption to reduce stalling of the motor. The Junk Mill can be manufactured in various sizes and blade configurations.
Design Benefits:
- Wear protection from stabilisation pads.
- Increased mill life.
- High number of flow holes for optimal debris flushing.
- Can be run on jointed pipe or CT.
| Tool OD (in) | Connections | Torsional Yield |
|---|---|---|
| Ø 2.630" | 1 1/2" AMMT Pin | 1,250 ft/lbs |
| Ø 2.750" | ||
| Ø 2.800" | ||
| Ø 3.380" | 2 3/8" Pac Dsi Pin | 4,300 ft/lbs |
| Ø 3.500" | ||
| Ø 3.625" | ||
| Ø 3.750" | ||
| Ø 4.130" | ||
| Ø 4.250" | ||
| Ø 4.380" | ||
| Ø 4.500" | ||
| Ø 4.630" |
*other sizes available on request.
Note: The equipment specifications provided are for information purposes only and may be subject to change without notice.
